Connect The Cables And Power Cord - Digital Server 3100R Serie Guia De Instalacion

5

Connect the cables and power cord

1. Connect the mouse.
2. Connect the keyboard.
3. Connect the monitor signal cable to the back of the
monitor and then connect it to the matching connector
at the back of your server.
4. Connect the power cord to the receptacle on the
server, then to an appropriate rack power outlet.
Installation Guide
CAUTION
Do not attempt to modify or use an external
100 Vac (Japan only) or 115 Vac power cord for
240 Vac input power. Modifying either cord can
cause severe equipment damage.
NOTE
Refer to the DIGITAL Server Rack Installation Guide for
more information.
7