TEFAL KIARA Manual Del Usario página 20

Preparing
the filter cartridge
1) Wash hands thoroughly before carrying out the
following steps.
2) Check that the cartridge bag is not pierced before
(fig. 1)
opening
bag is pierced.
3) Place the cartridge in a container with cold
drinking water (+4°C/+30°C) for 15 minutes and
shake to remove air bubbles
cartridge immersed for 15 minutes.
4) After 15 minutes of immersion, place the
cartridge in its position by pushing firmly
5) Fill the tank with cold tap water up to the
maximum level and leave it to filter without
putting on the lid
6) Dispose of the water (or use to water plants). The
first filtrations can be dark in colour due to the
carbon particles dispersed in the water. This is not
a health hazard.
7) Repeat this step three times (points 5 to 6) filling
the jug up to the maximum level each time and
then emptying the water immediately after
filtration.
8) Remove the cartridge and place on a clean
surface (for example a plate). Clean all
components.
9) Place the tank in the main unit. Place the
cartridge in the sediment filter. Finally, insert the
unit (cartridge + sediment filter) in the tank.
. Do not use the cartridge if the
(fig. 2)
(fig. 4)
.
. Leave the
(fig. 3)
.
EN
21