TEFAL KIARA Manual Del Usario página 23

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
Dry the strip to remove excess water. Wait one
minute and compare the colour based on the
following indications:
• The strip is a light green colour
tap water is not very hard, you can set your
electronic cartridge lifetime indicator to six bars.
The cartridge can be used for up to a maximum of
45 days.
• The strip is a pink colour
water is hard, you can set your electronic cartridge
lifetime indicator to four bars. The cartridge can be
used for up to a maximum of 30 days.
You can activate your electronic indicator according
to water hardness as follows:
• First press the "RESET" button. Then press the
"RESET" button again and hold for a few seconds
until the arrow moves to the desired position: H
for hard water, S for soft water
• HARD WATER SETTING: When the arrow
beside the letter H, four fixed bars are displayed
and the arrow flashes. Release the "RESET" button
and wait until the arrow  stays still. Release the
"RESET" button and wait until the arrow 
remains fixed. Your indicator is then set for hard
(fig. 11b)
water
• Filter 1 litre of water immediately after
activating the electronic indicator.
• SOFT WATER SETTING: When the arrow
beside the letter S, quickly press the "RESET"
button once, six fixed bars are displayed and the
arrow  flashes. Release the "RESET" button and
wait until the arrow  stays still. Your indicator is
then set for soft water
• Filter 1 litre of water immediately after
activating the electronic indicator.
• When the cartridge needs replacing, the arrow 
(fig.11c)
flashes
24
("A" fig. 10)
("B" fig. 10)
(fig. 11a)
.
(fig. 11a)
.
: the
: the tap
.
is
is
.

Publicidad

Tabla de contenido
loading

Tabla de contenido