Pyramid Technologies 4000 Manual De Instrucciones página 5

SET EVENT # NO
Use the UP and DOWN key until the desired event number that you wish to
set-up, edit or turn off is displayed. An event is one bell/horn ring per day
(M-F or all 7 days) at a given time for a given duration. Press the SELECT
key to select the event you wish to program or modify. If you wish to
bypass the bell set-up feature, scroll to the SET EVENT # NO and press
SELECT.
EVENT 1 = OFF-Press the UP and DOWN key to select the duration of
time that the signal device will ring (.5-15 seconds) or select OFF to disable
the event.
EVENT 1 HR = 12AM - Use the UP and DOWN key to select the hour for
the event to ring.
EVENT 1 MIN = 00 - Use the UP and DOWN key to select the minute for
the event to ring.
EVENT 1 DAY = ALL - Use the UP or DOWN key to select the days that
the event is to be active.
Press SELECT to return to SET EVENT # NO, press UP or DOWN to add
another event. Press SELECT to continue set-up.
Note: The 4000/4000HD has an internal clock. Changing any of the
features listed above will not affect the time totals even if an individual is
clocked in during the change. Changing any of the features listed below
5