Buzzers, Bells & Wall Clocks - Pyramid Time Systems 5000+ Manual De Instrucciones

AUTO TOTALING TIME CLOCK INSTRUCTIONS
Model 5000 /5000
+
SET EVENT USING BUZZER/BELLS
The time clock has an internal buzzer & bell ringer interface option to alert workers (or
students) of start times, breaks, lunch and dismissal times. The internal buzzer will also
sound when the time clock sends a BCD signal to ring a bell.
CONNECTING EXTERNAL BELLS
Add up to 15 bells and/or horns & schedule up to 50 events using Pyramid Time System's
TimeTrax™ Model 5300 Bell Ringer (sold separately).
Locate RJ-45 jack at back
1
2
Connect other end of cable to TimeTrax™ 5300 Bell Ringer.
3
Connect 5300 transformer to receptacle labeled POWER.
4 Wire bells and/or horns in parallel to labeled terminals on the 5300.
See TimeTrax™ 5300 Instructions for detailed installation instructions.
Sound bell or horn by scheduling an event (see page 11).
5
10 BUZZERS, BELLS & WALL CLOCKS
HD
+
(5000+)
1
Locate volume dial inside front cover to
left of display.
2 Turn dial clockwise to increase volume
& counterclockwise to decrease. NOTE:
Buzzer is intended for use in quiet
settings.
3
Sound the buzzer by scheduling an event
(See Event Menu on page 11).
or side of time clock & connect cable.
(5000+HD)
888.479.7264