Marmitek IR Control 10 XTRA Modo De Empleo página 12

Ocultar thumbs Ver también para IR Control 10 XTRA:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
9. OPTIONAL
Extra IR receiver (Art. nr. 08142/ 08143)
Every system needs at least one IR receiver (up to 6). With an extra IR
receiver you can also operate your A/V devices from another room.
IRC3060S – Surface Mount, Item # 08142
IRC3060S – Panel Mount, Item # 08143
See datasheets of the IR receivers at
IR extension cable with one blaster LED (Art. nr. 08144)
An IR blaster radiates much more infrared light (even up to 2 meters) so it
can operate multiple devices. Placement of the IR blaster is a lot less critical
as opposed to IR LEDs. See datasheets of the IR Blaster LED on
www.marmitek.com.
IR extension cable with two emitter LEDs (Art. nr. 08145)
The LEDs of the IR extension cables with 2 emitter LEDs have to be stuck
to the A/V device(s) you want to operate. See datasheets of the IR emitter
LEDs on www.marmitek.com.
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on
the product and/or its packaging must not be disposed of with unsorted municipal
waste. The symbol indicates that this product should be disposed of separately from
regular household waste streams. It is your responsibility to dispose of this and other
electric and electronic equipment via designated collection facilities appointed by the
government or local authorities. Correct disposal and recycling will help prevent potential negative
consequences to the environment and human health. For more detailed information about the
disposal of your old equipment, please contact your local authorities, waste disposal service, or
the shop where you purchased the product.
12
www.marmitek.com
© MARMITEK

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ir control 11 xtra

Tabla de contenido