Fm Installation Drawing - PR 9113 Manual De Instalación

LERBAKKEN 10, 8410 RØNDE DENMARK
9113
For safe installation of 9113B the following must be observed. The module shall only
be installed by qualified personnel who are familiar with the national and international
laws, directives and standards that apply to this area.
Year of manufacture can be taken from the first two digits in the serial number.
4501
For Installation in Zone 2 / Division 2 the following must be observed.
The 4501 programming module is to be used solely with PR electronics modules. It is
important that the module is undamaged and has not been altered or modified in any way.
Only 4501 modules free of dust and moisture shall be installed.
FM Certificate: ....................................................3038279
Hazardous area
Class I/II/III, Division 1, Group A,B,C,D,E,F,G
or Class I, Zone 0/1 Group IIC
Intrinsically safe apparatus
entity parameters:
Vmax (Ui)  Vt (Uo)
Imax (Ii)  It (Io)
Pi  Po
Ca  C + Ci
cable
La  L + Li
cable
The sum of capacitance and
inductance of cable and
intrinsic safe equipment must
be less or equal to Ca and La
Revision date:
2009-11-27

FM Installation drawing

-20 ≤ Ta ≤ 60ºC
44
43
42
41
54
53
52
51
Version Revision:
V3 R0
9113 - Product Version 9113-003
Non Hazardous Area or
Class I, Division 2, Group A,B,C,D T4
or Class I, Zone 2 Group IIC T4
4501
34
33
32
31
14
13
12
11
9113
9192 9394 95
Power
Rail
(terminal 11,12,13,14)
(terminal 31,32,33,34)
(terminal 91,92,93,94,95)
U : 253 V, max 400 Hz
m
Prepared by:
PB
9113QF01
Page:
1/3
33