• Do not bend or fold because the pad may not function properly.
Place the pads onto the plastic film and then store in the sealed
package when not in use.
• Do not apply ointment or any solvent to the pads or to your skin
because it will keep the pads from functioning properly.
• The pads are already pre-gelled and will adhere to your skin.
• To avoid damage to the adhesive surface of the pads, put the pads
only on the skin or on the plastic film provided.
• Make sure the components are connected well and the pads are
fixed on the part of the body you wish to treat or the therapy may
not be effective.
DO NOT USE YOUR PADS THIS WAY:
• Pads should not touch each other when placed onto your skin.
• Do not place on your spine or backbone.
• Pads should not touch any metal object, such as a belt buckle,
necklace or other jewelry made from metal.
34
EN
• Pads should not be placed simultaneously on the soles of both feet.
• Pads should not be placed simultaneously on the calves of both
legs.
• Do not share pads with another person. This may cause a skin
irritation or infection. Pads are intended for use by one person.
• Do not place or relocate the pads while the device is on.
• Always turn the power off before removing or changing the pad
location.
• Do not leave pads attached to the skin after treatment.
CAUTION WHILE USING THE UNIT
• If the unit is not functioning properly or you feel discomfort,
immediately stop using the device.
• Do not use for any other purpose except as described in this
manual.
• The electrode press studs are only compatible with the product
unit.
• Do not mix alkaline and manganese batteries, as this will shorten
the battery life.