Paramount MDX Manual Del Usuario página 7

Vacuum Breaker Method 4:
Suction vacuum release device, mechanical, or
electromechanical, venting or non-venting, may be used
provided it is tested and listed by a nationally recognized
testing laboratory in accordance with
ANSI/ASME A112.19.17 - Manufactured SVRS for
Residential and Commercial Swimming Pool.
Plumbing:
Position the MDX Sump even with the finished
1.
depth of the pool, spa or basin. ( Fig. 1 )
Place a level across the top of the MDX sump. The
2.
top edge must be level to ensure smooth finish to
interior of pool final finish. ( Fig. 2 )
Position the REQUIRED SDX High Flow Safety
3.
Drain TM on a sidewall of the pool, spa or basin.
Method: the 2nd Suction Outlet may be positioned
on the floor a MINIMUM of three feet (3') away
from any other Suction Outlet.
HYDROSTATIC FITTING: The hydrostatic port inside
the MDX Sump is equivalent to a 2" Threaded Female
Adapter and a 2" Slip Fitting Outside the MDX Sump.
For non-hydrostatic installations, install the 2" plug
provided. This port is for the purpose of a hydrostat only.
If a hydrostat is not used, plug this port. Do not install
any suction equipment (pump) to this port! Sump Elevation
= even with interior finish.
MDX PLUMBING
Fig. 1
TOP OF BEAM
TOP OF
CONCRETE SHELL
EARTH
Fig. 2
FUTURE WATER LINE
PLUMB LINE
SUMP