Troubleshooting; Corrective Action; Warranty - Kobalt SGY-A11WH Manual Del Usuario

TROUBLESHOOTING

If you have any questions regarding the product, please call cu stomer service at 1-888-3KOBALT,
8 a.m. - 8 p.m., EST, Monday - Friday.
PROBLEM
Irregular
darkening.
Auto-darkening
flickers or does
not darken.
Poor vision.

WARRANTY

Three (3) year warranty:
If you are not completely happy with your purchase, simply return it along with your original sales
receipt to the place of purchase. We'll repair it, replace it or refund your money. See store for
details.This warranty does not cover product malfunctions or damages, which result from the
product being tampered with, misused or abused. The operating instructions must be followed;
failure to do so will void the warranty. The manufacturer is not responsible for any indirect damage,
which arises out of the use of the product.
This warranty does not cover batteries.
Kobalt ® is a registered trademark of LF, LLC.
All rights reserved.
POSSIBLE CAUSE
1. When assembling the headgear to
the helmet, if one bolt is on the
upside of the hole, another bolt is on
the downside of the hole.
1. Front cover lens is soiled.
2. Photo sensors are dirty.
1. The cover lens and filter cartridges
are not clean.
2. Lighting conditions are too low.
3. The shade number is not correct.
4. Battery is low.
5. Replace battery.

CORRECTIVE ACTION

1. Adjust the headband bolts on
both sides to assure they are
both up or both down on the
hole.
1. Clean or replace the front
cover lens.
2. Wipe clean with a soft, lint-free
cloth.
1. Make certain the cover lens and
filter cartridges are clean.
2. Make sure that there is enough
light to activate the auto
darkening lens by holding it to
the light and switching between
the grinding mode and welding
mode.
3. Make certain the shade number
is correct and properly adjusted.
4. Replace both batteries. Make
sure the polarity of the batteries
is correct when installing them
5. Pull out the covers on the
automatic filter and replace both
CR2032 batteries. After batteries
have been replaced, insert the
covers back on the automatic
filter.
11
Printed in China
kobalttools.com