Connection Guide
Connect the camera's DC and BNC socket
cable to the extension cable's DC and BNC
plugs. Then connect the BNC extension
cable to an open channel on the back of
the DVR.
Positioning the Cables
•
When running your cable, try to avoid bending it at sharp angles.
•
Don't put your cable near live electrical wiring. AC electricity generates radio
"noise" which can interfere with the signal from your camera.
For 2 & 4 camera packs:
Connect the extension cable's DC
socket to the multiple sockets on the
power splitter. Then, plug the single
end of the power splitter to the DC
plug on the power adapter.
For a single camera:
Connect the extension cable's
DC socket to the DC plug on
the power adapter.
3