Swann PRO Serie Manual De Instrucciones página 5

Troubleshooting
On my Swann DVR,
'Video Loss' appears
where the image
from my camera
should be.
When I view an
image from the
camera at night I
only see a bright
spot and no image.
The BNC extension
cable will not
connect to my TV.
Technical Support Details
Swann Technical Support
All Countries E-mail: tech@swann.com
Telephone Helpdesk
USA toll free
USA PARTS & WARRANTY
AUSTRALIA
NEW ZEALAND toll free
UK
• Check the extension cable (power and video) is securely
connected to the camera.
• Check the video output from the camera is securely
connected to a video input channel on the DVR.
• Check the power from the camera is securely connected to
a power supply.
• A reflection can be caused in night vision mode if the
camera is looking through a window. Move the camera to
the other side of the window or to another location.
• Many TV's and monitors do not have a BNC connector but
do have an RCA connector. Connect a BNC to RCA adapter
(not supplied) to the end of the extension cable and then
plug into the RCA socket on your TV or monitor.
1-800-627-2799
1-800-627-2799
(M-F, 9am-5pm US PT)
1300 138 324
0800 479 266
0203 027 0979
5