Specific Safety Information; Description, Specifications And Standard Equipment - RS Pro GD-36 Manual De Instrucciones

Combustible Gas Leak Detector/English

3-Specific Safety Information

Warning
This section contains important safety information that is specific to this tool. Read these
precautions carefully before using the MICRO Combusitble Gas Leak Detector to reduce the
risk of fire, explosion or other serious personal injury.
SAVE THESE INSTRUCTIONS!
Keep this manual with the tool for use by the operator.
3-1.Combustible Gas Detector Safety
1-High concentrations of combustible gases can cause explosions, fires, asphyxia and
other hazards that could cause serious personal injury or death. Know the characteristics
of the gas you are working with and use proper precautions to avoid hazardous conditions.
2-Always turn on and calibrate the gas detector in an area known to be free of
combustible gases. Calibration in an area containing combustible gas will result
in incorrect calibration and lower than actual readings. This could result in
combustible gases not being detected.

4-Description, Specifications And Standard Equipment

4-1.Description
The MICRO Combusitble Gas Leak Detector is a gas leak locating tool that is used to
identify the presence of and isolate the source location of combustible gases such as
methane, propane, butane, ammonia, carbon monoxide and many others(please see
back of manual for a more complete list). Even low levels of combustible gas can be
detected in seconds.
The MICRO Combusitble Gas Leak Detector detects gas concentrations through the use of
an internal sensor. This sensor is heated during operation. As the heated sensor interacts
with gases, the unit immediately indicates to the user that combustible gases are present.
4
13/08/2017 Version No. 001
The MICRO Combusitble Gas Leak Detector indicates the presence of combustible gases
with visual, audio and vibration feedback mechanisms. There are five (5) threshold levels
of measurement within two (Low and High) settings of sensitivity. When the tool senses
the presence of a combustible gas, it will tell the operator by blinking the appropriate
light(s), triggering the appropriate audible alert or providing the appropriate vibration
alert.
The MICRO Combusitble Gas Leak Detector comes equipped with an attached flexible
16"probe hose.
4-2.Specifications
Visual Alert
5 Red LEDs: Gas Measuring
Levels; Sensitivity Visual Alert
Audible Alert(85db) Loud Audible Ticking Rate
(w/Continuous Modulation Proportional to Gas Level)
Vibration Alert
Standard
Sensitivity
<50 ppm(methane)
Response Time <2 Seconds
Range 0–10000 ppm (methane)
Sensitivity Level
5 Levels: 100/400/700/1000/>1000ppm
(methane) (HIGH)
Sensitivity Level 5 Levels: 1000/4000/7000/1000/>10000ppm
(methane) (LOW)
Warm Up Calibration Automatic
Warm Up Time
50 Seconds Max
Operating Buttons Seven: Power ON/OFF, High / Low Sensitivity,
Audio Alerts, Vibration Alerts, Auto Zero,
Auto Power Off, Hold
Batteries
Polymer Li-Ion Battery
Low Battery Status Low and High Sensitivity LED Solid
Sensor Connection Plug-In
Expected Sensor Life 5 Years
Probe
Flexible 16"/400mm
13/08/2017 Version No. 001
Combustible Gas Leak Detector/English
5