PROTEOR Dynatrek Instrucciones De Uso página 17

9– Advice for use, maintenance and safety
Clean the foot shell with a slightly damp cloth or sponge.
Use temperature : - 20°C / + 60°C.
No maintenance operation such as lubrication, work on the screws or other parts is required for this foot
except for the operations indicated in §8 that must be performed by the CPO.
A use of the foot that does not adhere to your CPO's recommendations can damage foot components
(carrying heavy loads for example).
In case of an abnormal behaviour of your foot, or if you feel changes in your foot features, or if the foot
sustained a hard shock, contact your CPO.
The presence of sand, particles or any foreign body inside the foot could alter its behaviour and damage it.
After use in water or in a very durty environment :
Remove the foot shell and take off the sock.
Rinse the foot and the other parts thoroughly with clear water to eliminate particles (mud, sand, ...).
Dry the different items before replacing the sock and the shell.
10– Recycling
The different items of the foot are special wastes and must be recycled according to the laws in force.
11– Regulatory information for France
Testing laboratory
Reports—Dates
C.E.R.A.H
Test reports :
N° 16-005-A of May 2nd, 2016
Nr of points
Heel : 1,17mm
133,32
Forefoot : 1,43mm
Permanent
Inversion / Eversion
deformation
(mm)
6 rue de la Redoute - 21850 Saint-Apollinaire - France
Tél. 33 (0) 3 80 78 42 10 - Fax 33 (0) 3 80 78 42 15
ht.orthopedie@proteor.com - www.proteor.com
Sagittal flexion amplitude
angle
Inversion : 5,04° Plantar flexion : 7,98°
Eversion : 8,53° Dorsiflexion : 8,52°
PROTEOR
1A60099-0818- Page 17/20