Technical Specifications - Fava NCP2 Guía De Uso

5.

Technical Specifications

Mechanical Specifications
Cord lenght
Dimensions
Weight
Electrical Specifications Amplifier
Voltage
Impedance
Protection
Electrical Specifications Headset
Microphone
Sensitivity
Frequency range 50 Hz ... 20 kHz
Speaker
Current drain
Range
Standards
Quality
Warranty
Read the "General Conditions of Sales" on our web site http://www.fava-ivo.it
© Copyright 2017 FAVA IVO Srl
All rights reserved. It is forbidden to reproduce, adapt or translate any part of this manual without the prior approval of
FAVA IVO Srl, except where permitted by copyright laws. The information contained in this manual is subject to change
without notice. All care has been taken in compiling and checking the documentation contained in this manual however
FAVA IVO Srl cannot assume any responsibility arising from the use of the same. The same applies for any person or
company involved in the creation and production of this manual.
and
Published by:
approx. 90 cm (headset cord); approx.. 60 cm (amp-cord)
30x140x170mm
approx. 140 g. (NCP-IDC version)
3÷60VDC (60mA max.)
<600Ω @ 1 kHz
max. 90 VAC; Shock proof circuitry
Uni-directional, condenser type
-44dB +/- 2dB
Dynamic, impedance 100Ω @ 1,6 kHz
Typical 2,5 mA – Valid for 2 NCP in serie with power supply 9VDC
(0Ω )
Typical 45 mA - Valid for 1 NCP with power supply 48VDC (2x400Ω )
approx. 3 km (power supply 9VDC)
according to EN ISO 9001:2015
are Fava Ivo Srl brands
FAVA IVO S.r.l.
Rev. 5 MAN_Pluri 17251
- 8 -