RIDGID SeeSnac CS10 Guia De Inicio Rapido página 5

Reviewing Images and Video
To review the files stored on the USB thumb drive, access the Media List from the
Job Manager screen
Select Key to select media files. Alternatively, access the Job Manager screen
from the Main Menu
Use the Right and Left Arrow Keys
log recordings.
Locating the Camera Using the Sonde
If using a SeeSnake pipe inspection system with a built-in Sonde, detect the
camera's location underground by using a locator such as the RIDGID-SeekTech
SR-20, SR-60, Scout™ or NaviTrack® II.
1. Press the Sonde Key
2. Run the SeeSnake push cable from 5 ft to 10 ft [1.5 m to 3 m] into the pipe.
3. Use the locator to find the Sonde's position by setting it to Sonde mode and
by scanning in the direction of the Sonde's probable location until the locator
detects the Sonde.
4. If desired, extend the SeeSnake push cable further down-pipe and locate the
Sonde again starting from the previous located position.
5. Once you have detected the Sonde, use the locator indications to zero in on
its location precisely. For detailed instructions on Sonde locating, consult the
operator's manual for the locator model you are using.
Completing an Inspection
Close current Jobs to make a Report. Making a Report will allow images and video
to be viewed on any web browser.
1. Press the Job Manager Key
2. Navigate to the "Eject USB."
3. Press the Select Key
4. When the USB LED light turns OFF, remove the thumb drive before shutting
down the CS10.
Delivering Reports from the Thumb Drive
After closing current Jobs and finalizing a Report, remove the thumb drive from the
CS10 and insert it into a USB port on a computer to view the list of files.
Double-click the file named "report.html" to view the media in a web browser. Click
on the preview of each media item in the web browser to view full size photos and
to playback video and Autolog video. Use the browser's "back" button to return to
the initial page.
. In the Media List use the Arrow Keys
.
to fast forward and rewind video and Auto-
on the CS10 to turn the Sonde ON and OFF.
.
.
SeeSnake CS10 Quick Start Guide
and the
English – 5