Irritrol RainSensor RS1000-I Guia Del Usuario página 5

B. Controllers with no sensor inputs and no pump start or master valve:
Refer to Figure 7. Disconnect the valve common wire from the controller's com-
mon terminal (generally marked "C", "COM", or "VC"). Join this wire to the White
wire using a wire connector. Attach the Brown wire to the valve common terminal.
Note: The Yellow wire is not used in this application.
Figure 7
To Valves
Common From Valves
C. Controllers with pump start or master valve and no sensor inputs:
Refer to Figure 8. Disconnect all common control wires from the controller's com-
mon terminal (generally marked "C", "COM", or "VC"). Join these wires to the White
wire using a wire connector. Be sure to include the common wire from the Pump
Start Relay or Master Valve in this connection. Attach the Brown wire to the com-
mon terminal.
Note: The Yellow wire is not used in this application.
Figure 8
To Valves
Common From Valves
Irrigation System Controller
Wire Connector
Irrigation System Controller
Pump Start
Relay or
Master Valve
Wire Connector
Red
Red
Brown
White
Yellow (Not Used)
Red
Red
Brown
White
Yellow (Not Used)
5