I.SOUND DuraWaves Glow XL Guía De Usuario página 5

NOTES:
• The club and equalize themes only display when playing music.
• The speaker will default to club theme a er the speaker has
been turned o .
• To adjust the brightness of the LED themes, hold down the
light bu on and press the volume up/next track bu on to
brighten the lights or press the volume down/previous track
bu on to dim the lights.
Mode bu on
• Press and release the bu on to cycle through the di erent modes.
Modes include:
• Bluetooth mode – To play wireless via Bluetooth.
• AUX IN mode – To play via audio cable.
• Press and hold for 3 seconds to disconnect om Bluetooth
pairing (to allow another user to connect).
Charging your DuraWaves Glow XL
NOTE: Make sure the DuraWaves Glow XL is fully charged
before using it the rst time.
1. Pull up the protection cover of the DuraWaves Glow XL on
the back of the speaker. There is a small opening on the
bo om of the protection cover to help open.
2. Gently plug the Micro-USB end of the included charge cable
into the charge port labeled (
3. Plug the USB end of the cable into a powered USB port, such
as a computer, laptop, or USB AC adapter (not included).
4. The power indicator LEDs will glow orange according to the
ba ery level:
1 LED = 1%-25% 2 LED's = 26%-50%
3 LED's = 51%-75% 4 LED's = 76%-100%
5. Once the speaker is fully charged, the power indicator LEDs
).