Tifell Ecomax 50 SCW Instrucciones De Instalación, Uso Y Mantenimiento página 67

CÓDIGO FALLO
E15 SONDA DE RETORNO
E16 ELECTRIC FAN
E18 INSUFFICIENT
CIRCULATION
E21 GENERAL INTERNAL
BOARD ERROR
E22 PARAMETERS
PROGRAMMING REQUEST
E35 RESIDUAL FLAME
E40 SUPPLY VOLTAGE
2. MANTENIMIENTO
CAUSA POSIBLE SOLUCIÓN
SONDA ESTROPEADA O SUSTITUIRLA;
MAL CALIBRADA (VALOR DE
RESISTENCIA 10 KOHM A 25
°C NTC);
CONECTOR DE LA SONDA COMPROBAR EL CABLEADO.
DESCONECTADO O HÚMEDO
ELECTRIC FAN BOARD REPLACE IT;
BROKEN;
ELECTRIC FAN BROKEN; REPLACE IT;
FAULTY POWER SUPPLY REPLACE IT.
CABLE.
EXCHANGER OBSTRUCTED; CLEAN OR REPLACE THE EXCHANGER;
CIRCULATOR BROKEN OR CLEAN THE IMPELLER OR REPLACE
DIRTY IMPELLER. THE CIRCULATOR.
INCORRECT SIGNAL IF THE MODULATION BOARD DOES NOT
RECOGNITION BY THE RESET THE ERROR AUTOMATICALLY,
MODULATION BOARD REPLACE IT.
MICRO-PROCESSOR.
MICRO=PROCESSOR PARAMETERS REPROGRAMMING.
MEMORY LOSS.
FAULTY DETECTION CLEAN IT OR REPLACE IT;
ELECTRODE;
FAULTY DETECTION REPLACE IT;
ELECTRODE CABLE;
FAULTY MODULATION REPLACE IT.
BOARD.
SUPPLY VOLTAGE OFF THE CHECK THE POWER SUPPLY
OPERATION RANGE (160 NETWORK (THE ERROR DEACTIVATES
VOLTS). AUTOMATICALLY AS SOON AS THE
SUPPLY VOLTAGE FALLS BACK WITHIN
THE REQUESTED LIMITS).
333111511 REVISION 1509.0 ECOMAX 50 SCW ES
RESET
AUTOMÁTICO.
AUTOMATIC.
AUTOMATIC.
AUTOMATIC.
MANUAL RESET
(CUT OFF THE
TENSION).
MANUAL RESET
(PRESS THE RESET
' ' KEY).
AUTOMATIC.
67