SLV Elektronik LHV60W24 Instructions De Montage página 4

4. Safety Function
In case of a short circuit or overload the LED Driver will automatically cut off. It does not have a
fuse of the conventional kind. Thus the load circuit is not separated! As soon as the defect has
been repaired, the LED Driver will automatically cut back in.
5. Excess Temperature
In case of excess temperature due to external heat sources the built-in temperature switch will
disconnect the LED Driver from the mains. As soon as the LED Driver has cooled off, it will
automatically cut back in.
6. Heat Dissipation and Heat Transfer
Operation in excess ambient temperature or through external heating will reduce the service life.
During the installation process ( particularly into luminaires ), heat dissipation ( heat transfer ) is to
be provided through suitable measures. The ambient temperature and/or the tc-point temperature
may not be exceeded at any time. We are not liable for damage resulting from improper use.
9mm
12mm
L N PE
220-240V
24VDC
-
+
L N PE
+
Switch
K:\Dateien-HEP\Daten-HEP\Montageanl. deutsch, engl, span\Montageanl.5Sprachen\Montageanl. LHV60+100W24 d_e_f_s_nl.doc