Tools And Materials; Before You Begin - KALLISTA P19300 Manual De Instrucciones

IMPORTANT INSTRUCTIONS (cont.)
The PEX fittings on this valve have been third party certified by CSA using the following: Sioux Chief 1/2" copper
crimp ring and CSA certified VANGUARD VANEX
1/2" crimp tool in accordance with the Sioux Chief instructions.
PEX connections are designed for use with any ASTM F 1960
compliant cold expansion retaining rings and ASTM F 887 compliant
PEX tubing. These fittings are not compatible with ASTM F 1807
copper crimp reinforcing ring and PEX tubing assemblies.
The PEX fittings on this valve have been third party certified by CSA using the following: WIRSBO AQUAPEX 1/2"
potable tubing, Uponor ProPEX 1/2" cold expansion retaining rings and the Uponor ProPEX Hand Expander tool in
accordance with the Uponor Instructions.
IMPORTANT NOTICE TO INSTALLERS! Please fill in the blanks in
the information box below. Retain this Guide for future reference.
NOTICE TO HOMEOWNERS! This device has been preset by
_______________________ of _______________________________ to
ensure a safe maximum temperature. Any change in the setting may
raise the discharge temperature above the limit considered safe, and
lead to scalds.
Date: ______________

Tools and Materials

Strap Wrench Hacksaw or
Tubing Cutter

Before You Begin

CAUTION: Risk of personal injury. The water temperature
should never be set above 120°F (49°C).
Kallista
1/2" PEX potable tubing. Crimps were made using a Sioux Chief
®
PEX Crimp Tool
(Optional)
Cold
Expansion Tool
3
Solder
Hex Wrench
Sealant Tape
089585-2-BE