Temperature Control Options (One Thermostat) - Honeywell REM5000R1001 Manual Del Usuario

Operating Manual

Temperature control options (one thermostat)

Display shows temperature at
selected device
58
OUTDOOR
°
78
°
READ TEMP FROM...
THERMOSTAT
Press to choose temperature
measurement device
78
SET TO
°
•
THIS DEVICE
Both the thermostat and the remote con-
trol have built-in temperature sensors.
Press a button to choose whether the
system responds to temperatures at the
thermostat, or at the location of the
remote control.
If you use the remote control to measure
temperature, keep it in an upright posi-
tion in an area with good air circulation.
Do not place it near sources of heat or
cold air. Keep away from air ducts, direct
sunlight, appliances and electronic
devices.
Note: This option will not appear if you have a
zone system (more than one thermostat). In zone
systems, temperature is always measured at the
thermostats.
6