Indications For Use; Cleaning & Disinfecting - PharmaJet Tropis Instrucciones De Uso

The PharmaJet Needle-free Injection System is intended to deliver various
medications and vaccines intradermally by means of a narrow, high velocity
fluid jet, which penetrates the skin and delivers the medicine or vaccine
into the dermis. Healthcare providers who routinely administer injections
may use the PharmaJet Needle-free Injection System. It may also be used
by patients authorized by their physicians to self-inject, or have other
individuals administer injections of prescribed medication.
The following local responses may occur with Needle or Needle-free
Injection Technology.
a) Some medications may produce a burning, aching, or stinging
sensation. Check the medication information for a description of
local reactions.
b) Following the injection, a drop of blood may appear. Blood and/
or fluid loss can be minimized by immediately applying pressure to
the injection site for approximately 60 seconds with a cotton ball or
gauze. Apply adhesive bandage if needed or desired.
c) To ensure delivered dose to target tissue, refer to Section 4) Give
Injection for proper technique. For a partial or incomplete injection,
refer to the medication or vaccine product labeling.
d) In the event of changes in performance of the device, DO NOT USE,
contact PharmaJet.
Cleaning, Disinfecting, Storage, and Disposal
CAUTION: DO NOT autoclave.
CLEANING & DISINFECTING: The Injector may be cleaned by wiping the
exposed surfaces using 70% Isopropyl Alcohol.
STORAGE: Ensure that the Hammer is in the uncharged position.
NOTE: The Injector is resistant to short term duration exposure to water.
DISPOSAL: Dispose of used devices in accordance with local requirements.

Indications for Use

Clinical Notes
Storage and Transport
Temperature:
(158°F)
-40°C
(-40°F)
70°C