B.doorbell; C.clock; Operations; A.monitoring Functions - Ameriphone AM-6000 Guía De Usuario

INSTALLATION AND SET-UP
B. Doorbell
Door Bell
Push latch
inward with
a small
screwdriver
to release
Fig. 4 - Doorbell and battery
installation
C. Clock
1. Press the Time and the Hour (or
Minute) buttons simultaneously
to change time setting.
2. Press the Alarm button to check
the alarm setting.
3. Press Alarm and Hour (or
Minute) buttons to change
alarm clock setting.
4. Use Alarm/Page selector
switch to turn alarm on or off.
8
Mounting
back plate
+
–
12V alkaline battery

OPERATIONS

A. Monitoring Functions
The console has six indicator lights
for each of the alerting functions of
the Alertmaster AM-6000. Some
functions require an optional
accessory to be purchased.
Anytime the Alertmaster
Notification System is activated by
any function(s) the lamp and bed
shaker will activate, then stop and
reset after 24 seconds, or use the
reset button on the console to stop
and reset it. The lamp flashes in
different patterns for each function.
1. Phone
The phone indicator light illuminates
when the phone is ringing. The
lamp will turn on for two seconds,
off for four seconds, and repeat.
Answering the phone resets the
Phone indicator and any other
Alertmaster systems in your home.