AMQ ACTIV-PRO Guia De Instalacion página 12

PHASE 7 | Connecting Handset and Power
Step 1
Make sure that the Left motor plugs into the M1
port, and the Right motor plugs into the M2 port.
Step 2
Connect power plug after the motors and handset
are connected properly.
Left
motor
ACTIV-PRO INSTALLATION GUIDE | 12
Power Right motor
Handset
Left motor
Step 3
Reset the base by holding the down arrow button
until it reaches its lowest height.
Step 4
Attach the plastic cable management to desired
area to secure cables and wires.
Facing
Direction
Power
Connect each plug according to the drawing.
Orient yourself to the table assembly by facing
as a user to identify the left and right motors
Handset
Right
motor
amqsolutions.com