System Settings; Display Brightness; Software Update - Ruark Audio Tabletop Stereo R2 mk3 Guia Del Usuario

System settings

Bass and treble
MENU > System > Audio
Adjust the bass and treble levels using the CONTROL
KNOB then press it to save the setting.
Loudness
Loudness automatically boosts the treble and bass
frequencies at lower volumes.
MENU > System > Audio
Highlight Loudness and press the CONTROL KNOB to
toggle on and off.
3D sound
3D widens the stereo sound stage and creates a more
immersive and involving sound.
MENU > System > Audio
Highlight 3D and press the CONTROL KNOB to toggle
on and off.
Date and time
MENU > System > Date and time
The time and date are automatically synchronised with
national time signals broadcast over DAB, network and
FM (when available).
You can also set the time manually by turning auto
update off and change the time and date format.

Display brightness

MENU > System > Brightness
You can independently adjust the brightness of the
display when the radio is on On level and in standby
Standby level. When your R2 is in standby and the
standby brightness is set to OFF, pressing any key on
the dial or remote will briefly illuminate the display.
Language
MENU > System > Language
Change the menu language.

Software update

MENU > System > Software update
Your R2 is set to automatically check for software
updates. If one is available, you will be asked whether
you want to download and install it.
CAUTION: Disconnecting the power during a software
update could permanently damage your R2.
EN
DA
DE
FR
IT
ES
NL
NO
EN-15