Plantronics Savi D100 Guia De Inicio Rapido página 3

Subscription Button
USB Adapter
Indicator Light
Indicator Light
Charge Plate
CD includes:
• Plantronics Software
• Complete User Guide
4
Base Power Supply
USB Charging Cable
1 Connecting USB Adapter to PC
1-1. Insert the USB adapter into USB Port on PC. The indicator light on the USB adapter will
be solid red to indicate the USB adapter is powered on.
The USB adapter can be folded as shown.
1-2.
ImPoRTAnT noTE It is recommended that Windows be updated with Service Pack levels listed
below:
Microsoft ® Windows XP Service Pack 3 (SP3) or later
Microsoft Windows Vista Service Pack 1 (SP1) or later
2 Attaching Charge Cradle to Charge Plate
2-1. Connect the headset charge cradle (supplied with headset) to the charge plate.
Push firmly on the cradle until the cradle snaps into place.
3 Connecting Power Supply to Charge Plate
3-1. Connect the base power supply into the power jack on the charge plate.
3-2. Connect the power supply to the outlet. The indicator light will be solid green.
4 Docking and Charging Headset
4-1. Gently push the headset into the charge cradle.
4-2. Charge for at least 20 minutes prior to the first use.
A full charge takes 3 hours.
noTE The USB charging cable can also be used to charge the headset. To successfully charge
your headset with the USB cable the PC must be on and in an active state (not standby). The
charging time will vary according to the number of other devices drawing power from the PC's USB
port(s).
Charging time
20 min .....................
minimum charge
before first use
3 hours ...................
Full charge
5