Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
NORMAL USE, IMPROPER USE, NOT CORRECT USE OR FORBIDDEN
The machine described in the present instructions manual for the use is foreseen to be driven from an only operator skilled
and prepared on residual risks, but with the competence, in safety matter, of maintenance employees.
The operator should have at least the minimum age foreseen from the social laws about the work and having had the necessary
technical training at least from a more expert operator that had him preliminarily trained for the correct use of the machine.
In its NORMAL USE, and reasonably foreseeable, the machine can be used only to beat, whisk, mince,
crumble, emulsify , reduce in mash, directly in pot or an adequate container to use in the collective and
institutional restoration.
According to the tool type, it is possible to prepare directly in pot thick vegetable and pasta soups, soups, mashed
potatoes, creams, batters, mayonnaise, almonds pulp, cheese creams and what other like that.
The machine must be taken, supported and handled, placing the hands in the prescribed zone (see figure pag.
11).
The machine must not be used IN IMPROPER WAY; in particular:
1.
It must not be used for domestic uses,
2.
It must not functioned with parameters different from those showed in the technical characteristics table,
3.
For every use of the machine with modalities different from those showed in the present manual, the
manufacturer declines every responsibility,
4.
The user is responsible of the damages resulting from the lacked exercise conditions observance in
accordance with the agreed technical specifications and order confirmation,
5.
the tools must not be functioned on vacuum;
6.
Not tamper or damage intentionally nor remove or hide the labels.
The machine must not be used IN NOT CORRECT WAY or FORBIDDEN so some damages or injuries
could be caused for the operator; in particular:
1.
It is forbidden to draw the electric feeding cable or the machine to disconnect the feeding plug,
It is forbidden to put weights on the machine or on the electric feeding cable,
2.
It is forbidden to put the electric feeding cable on sharp parts or with burn danger,
3.
It is forbidden the machine use with the damaged and not integer electric feeding cable or with the
4.
control devices;
5.
It is forbidden to leave the machine off with the electric feeding cable connected with the feeding plug,
6.
It is forbidden to insert any type of object inside the motor ventilation cap;
7.
It is forbidden to put the machine above different objects from the working ground used in the food
field of height included between 900 – 1100mm from the trampling level,
8.
It is forbidden the use of inflammable substances, corrosive or harmful for the cleaning or products
excessively alkalines as the caustic soda or ammonia,
9.
It is forbidden to plunge the machine in water or in other liquids;
10.
It is forbidden the not authorized personnel use and with clothes different from that showed for the use,
11.
It is forbidden the use of the whisk tool in the machines with fixed speed,
12.
It is forbidden to introduce in the pot with the machine inserted and in function, products or objects
having characteristics different from those showed in the normal use, such as for example bones, frozen
meat, not food products, or other objects as scarves, etc...,
13.
It is forbidden to take, support and handle the machine, placing the hands in different zones from
those showed in the normal use and however maintain in function the machine with an only hand,
14.
It is forbidden to push or lets push from others the feed products or the ingredients towards the
bottom of the pot with the inserted machine and in function, and in general introduce the hands or any
other body part, in the pot during the machine functioning,
15.
It is forbidden to introduce the machine in the pot, more than the immersion nick and however over
the tool blocking nut,
16.
It is forbidden to remove the machine from the pot, before that the tool is completely stopped and
however before 10 sec from the machine stop control,
17.
It is forbidden to work on the tools block systems before the tool complete stop, and however before 10
sec from the machine stop control and connected to the electric feeding,
18.
It is forbidden the partial removal of the protections and of the danger signals.
19.
It is forbidden the functioning without that all the precautions about the residual risks elimination have
been adopted on behalf of the user,
20.
It is forbidden to smoke or use free flame devices and manipulate incandescent materials, unless some
suitable safety measures aren't adopted,
21.
It is forbidden to activate or set the control and blockage devices as knobs or similar both during the
machine functioning both if you aren't authorized
The user is however responsible of the damages resulting from the lacked observance of the specified normal
use conditions. For possible doubts you can enquire at the Authorized Assistance Center.
Pag.
di
7
13
Publicidad
Tabla de contenido
