Intended Use; Electric Connection - GOK LPG PRO Manual Del Usario

INTENDED USE

The electronic test device is used to check for leaks in LPG systems in leisure vehicles and
small boats (e.g. in Germany, for tests by experts according to Worksheets G 607 or G 608).
If it is not used as intended, all warranty and product liability claims shall be void.
Place of operation
May not be used in explosion-prone areas.
Can cause an explosion or serious injuries.
Installation outside the defined ex zone.
• May be used indoors and outdoors, if protected against the weather
To be used only for installed LPG systems and LPG-operated devices in caravans and motor
homes and in small boats with a hull length up to 24 m.
Test medium
• Air
Test conditions
• Greatest accuracy is achieved when the leak check is carried out at 20°C, ideally the check
should be carried out at a temperature of 15°C to 25°C
The temperature of the supply line to be tested should fulfil the above test conditions during
the test.

ELECTRIC CONNECTION

No. Function
1 Printer connection
2 Pressure connection for pump
3 Main ON/OFF switch
4 Wall plug transformer connection
5 Power supply connection
1
part no. 27 105 51
Elektronic test device Leak Check LPG PRO
3
2
Comment
For connected printer
To the LPG system
Switch the device OFF when it is not
being used
or is being stored
Battery charger or power supply
For connected printer
5
4
5 / 12