Pool - Waterflex Fit’s Pool WX-FITSPOOL/2017 Guía De Instalación Y Uso

6.6. Pool assembly
Step 1 : Installation
Assemble the product on a clean, flat and dry
surface.
Insert all 16 straight steel tubes
straight polystyrene panels
Step 3 : Assembly
Assemble the frame using the 16 stainless steel
L-shaped tubes as shown above.
Make sure the lock buttons are in place in their
slots.
To facilitate assembly, your structure must be into
two parts: three sides and two corners, and one
side and two angles (see photo).
6. INSTALLATIoN
in the four
3
.
2
Holes for the pump connectors
Step 2 : Positioning
Position the square panels as shown above.
The holes for the pump connectors must be fac-
ing up.
All panels have one side thicker than the other; it
must be placed towards the interior of the struc-
ture.
Step 4 : Assembly (continued)
Place both parts face to face and assemble them
to form the complete frame.
Make sure the lock buttons are in place in their
slots before continuing.
37