Waterflex Fit’s Pool WX-FITSPOOL/2017 Guía De Instalación Y Uso página 39

Step 9 : Floor
Position the floor tiles on the base of the pool
without overlapping them.
Use the ladder provided to go into in the pool.
Step 11 : Inner liner (continued)
Place the inner liner on the base of the structure
on the floor tiles making sure to match the
side with filter connectors with the holes in the
structure.
Insert the drainage adapter and the filter tubes
in the holes provided. The electrical cable for the
lighting should be inserted in the central lower
hole.
6. INSTALLATIoN
Step 10 : Inner liner
Before installing the inner liner, connect the filter
and air connectors if they are not already installed.
These connectors are tightened by hand and do
not require special tools for their assembly. over-
tightening might damage the fittings.
Step 12 : Inner liner (continued)
Place the top of the inner liner over the edges
of the structure and position it correctly, without
folds.
39