Tare Function - On Balance MYCO MM Serie Guia Del Usuario

Tare Function

The Tare function allows you to subtract the weight of a
container so that the display only shows the weight of the
contents.
Place an empty tray
or container on the
platform.
NOTE: The weight of the container will subtract from
the available capacity and will leave a negative value
on the display once the weight is removed. Press
TARE again to return the display to zero.
Auto - Off
1.
same time quickly press ON/OFF key 4/5 times until
180 is displayed, release the buttons.
2. Press the MODE key to cycle through your choices of
0/60/120/180 seconds. Then press ON/OFF
3. The display shows "PASS".
Accuracy
Your scale comes calibrated from the factory and most
users won't need to calibrate their scale for a long time.
You should check your scale's accuracy periodically using
calibration weights and perform calibration if necessary.
NOTE: Only use trusted calibration weights.
Household items such as bottles and cans with
weights printed on the side are not suitable for
checking accuracy as these values are approximate
and don't include the container weight (Net Weight).
Press the TARE
key to subtract the
container's weight.
hold down the MODE key, at the
Add items to the
container to see their
weight on the display.