Hog Slat GROW-DISC HSCD200 Manual De Instalación Y Operación página 15

GROW-DISK™ Feed System
SYSTEM: Access to CLOCK, IMPORT/EXPORT, PASSWORD and FACTORY RESET.
1
5
1. IMPORT: With flash drive in place, use this button to import SETTINGS from a flash drive. SETTINGS can
be programmed from a single controller then used to populate SETTINGS in other controllers to eliminate
the need of programming each controller.
2. EXPORT: With flash drive in place, use this button to export SETTINGS to the flash drive. Data exported is
SETTINGS and TIMED feeding schedules.
3. DATE / TIME: To set clock, press the white bar displaying the date/time. Pop up screen shown below will
be visible. Values must be entered correctly the first time through (BACK SPACE button is inoperative in
this function). If a mistake is made, simply press CANCEL and re-enter. Time is 24 hour format. For
07:00 (7:00AM) or 19:00 (7:00PM)
Format example: 2017-09-25 08:10:00 for AM or 2017-09-25 20:10:00 for PM
Hog Slat Inc. Newton Grove, NC USA
2
March 2019 REV A5
4
6
3
7
15