Maintenance And Care; Warranty And Servicing - Tru-Test S1 Guia De Inicio Rapido

5
Keep the underside of the weigh platform and load bars free from dirt or

stones.
Do not leave the indicator, load bars or indicator connector immersed in

water.
Cables should be placed under the weigh platform to prevent damage.

When not in use, always replace the dust cap on the indicator connector.

Remove dust and moisture from the plugs and dust cap using methylated
spirits, ethyl alcohol, or a suitable electrical contact cleaner. Stronger
spirits must not be used, as they may react with the plastic.
6
For service and warranty information, see www.tru-test.com
All trademarks with an * are not owned by Tru-Test Limited and belong to
their respective owners.
8

Maintenance and care

Warranty and servicing