Overheating Protection - Mx Onda MX-PI2612 Manual De Usuario E Instalacion

Using the timer (The cooking zone must be working)
1. Touch the select button for cooking zone 2 for which
you want to set the timer.
2. Touch the timer button 5, and the display will flash
the factory default sleep time.
3. Set the time for automatic shutdown using the power
level selector. Touch the power level 3 selection
circle with your fingertip and move in a circular
motion to the right to increase the time in 5 minute
jumps or to the left to increase the time in 1 minute
jumps.
If the set time exceeds 99 minutes, the timer will
automatically return to 00 minutes.
4. To cancel the timer, touch and hold your finger on the timer button 5, until
the timer indication turns off.
5. Once the time for automatic shut-off has been set, the digital display of the
power of the timed cooking zone will alternately show the selected power
and the time remaining for automatic deactivation.
The cooking zone that is not set with the timer will continue to
operate if it is turned on previously.
Note: If you want to change the time for automatic shutdown after setting the
timer, you must start from step 1.

OVERHEATING PROTECTION

Inside the induction hob, a temperature sensor is located, which is constantly
monitoring the operating temperature, when it is excessive and the built-in fans
are not capable of reducing the temperature, the hob will stop working
automatically.
14