General Settings - Chal-tec auna Connect System Manual Del Usuario

GENERAL SETTINGS

Setting Sleep
This feature enables your radio to switch to standby mode by itself after a
set sleep time.
1. Press MENU button - Main menu - Sleep, and then press SCROLL/
SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to view options Sleep OFF, 15, 30, 45, 60 or
90 MINS, press SCROLL/SELECT knob to confirm. The sleep icon and
sleep time will show on the display.
3. To turn the sleep function off while the sleep timer is still counting down,
select "Sleep" option, turn SCROLL/SELECT knob to select "Sleep OFF."
NOTE: Alternatively, press SLEEP button repeatedly to set sleep time.
Setting alarm
Your radio includes dual alarms. Set Alarm, making sure set time first.
1. Press MENU button - Main menu - Alarms, and then press SCROLL/
SELECT knob to confirm.
NOTE: Alternatively, press ALARM button to go to alarm menu (on remote
control).
2. Turn SCROLL/SELECT knob to select "Alarm 1" or "Alarm 2," and then
press SCROLL/ SELECT knob to confirm.
3. Turn SCROLL/SELECT knob to select options, and then press SCROLL/
SELECT knob to confirm the setting.
Alarm active day: Off, Daily, Once, Weekends or Weekdays
Enable
Alarm time: 00:00 (set the time manually)
Time
Alarm: Buzzer, internet Radio, DAB or FM (if the wake-up mode is
Mode
DAB and the DAB signal strength is low, the buzzer alarm will be
triggered.)
Last listed or saved preset station (not available for Buzzer mode)
Preset
Alarm mode
Volume
Save the alarm
Save
4. When the display shows "Alarm Saved," the alarm setting is successful.
or will show on the display.
EN
67