Hydraulic Installations - Astra BANHEIRAS Manual De Instalación

6.1

Hydraulic Installations

a - Install the water inlet as shown in picture 2.
Note.: Check the assembly options.
b - Connect the TEE that comes out of the outlet
valve to the drain (picture 3).
c - Maximum entry water pressure: 400kPa.
Minimum entry water pressure: 10kPa.
2
Water inlet
3
1- Coupling box
2- Drain pipe 40mm
3- Plastic outlet valve 40mm
4- Plastic water inlet
5- Elbow 25mm – 90°
6- Brown pipe 25 x 40
7- Spiraled hose
2
1
Assemblage options
Metallic conector
(cold / hot water)
PVC connector
(cold water)
Metallic connexions
(hot / cold water)
4
3
are not included
ASSEMBLAGE OF THE "OVERFLOW KIT"
Use only silicon to weatherproof the
valve/bathtub.
Pieces 5, 6 and 7 (picture 3) are included in
the Super Deluxe and Gran Deluxe version.
If the assemblage of the overflow kit is made
as shown in picture 3, you must bore into the
inlet with a 20mm broach (picture 4).
5
6
7
TEE
Pieces 1 and 2
Hot water
Cold water
Hydraulic system
4
31