Unisar TV Listener K4 TV865 Manual De Instrucciones página 4

STEREO INSTALLATION
Fig. 1
Follow these instructions if your equipment has two audio output jacks (stereo
televisions, DVD players, cable boxes).
1. Connect the audio cord on the back of the transmitter (A) to the RCA 3.5mm
stereo adapter (D).
2. Plug the red end of the adapter into the right audio output jack and the white
end into the left audio output jack on your equipment.
If you are connecting to your television, use the audio jacks located on the back.
The jacks are labeled "AUDIO OUTPUT" (not just "AUDIO"). Do NOT use the audio
jacks on the front as these are audio input jacks. Be sure to plug the adapter into
the audio output and not the video output.
If you are connecting to a device that is connected to your television (DVD player,
VCR, cable box, home theater system), this device must stay on when using the
TV Listener. The VCR must also be set to the same channel as the television.
3. Plug the AC adapter (C) into the jack marked "12VDC" on the back of the trans-
mitter and plug the adapter into an electrical outlet. For long periods of non-use,
we suggest unplugging the AC adapter.
{ }
6
white - LEFT
red - RIGHT
SMALL HEADPHONE JACK INSTALLATION
Fig. 2
Follow these instructions if your equipment has a small headphone jack (CD players,
portable stereos, computers, MP3 players).
1. Connect the audio cord on the back of the transmitter (A) directly into the head-
phone jack on your equipment.
2. Plug the AC adapter (C) into the jack marked "12VDC" on the back of the trans-
mitter and plug the adapter into an electrical outlet. For long periods of non-use,
we suggest unplugging the AC adapter.
NOTE: If you connect the transmitter to your television using the headphone jack, the
sound from your television will only be heard through your headset and will not be
heard from your television speakers.
{ }
7