Safety Instructions; Features - Optimus A-2716 Manual De Instalación Y Funcionamiento

1. SAFETY INSTRUCTIONS

Read all safety instructions carefully.
Keep this owner's manual for future reference.
Ensure that the mains source voltage (AC outlet) matches the voltage rating of the product.
Failure to do so could result in damage to the product. Unplug the product during electrical
storms and when unused for long periods of time.
Always use proper ready-made insulated cabling. Failure to do so could result in shock/death
or fire. If in doubt, seek advice, from a registered electrician.
Do not remove any covers. There are areas inside the equipment where high voltages may be
present. Covers should be removed by qualified service personal only.
To prevent fire and damage to the product, use only the recommended fuse type as indicated
in this manual. Do not short-circuit the fuse holder. Before replacing the fuse, make sure that
the product is OFF and disconnected from the AC outlet.
Before turning-on the product, make sure that it is connected to ground.
Do not use this product when in close proximity to water. Do not install this product near any
direct heat source. Do not block areas of ventilation.
When cleaning is required, blows off dust from the product or use a dry cloth. Do not use any
solvents as alcohol. Keep the product clean and free from dust.
Refer all servicing to qualified service personnel only.
Note: The information furnished in this manual does not include all of the details of design,
production, or variations of the equipment. Nor does it cover every possible situation that
may arise during installation, operation or maintenance. If you need special assistance
beyond the scope of this manual, please contact our technical service.

2. FEATURES

•
8 x 8 signal matrix.
•
Inputs and outputs don't interfere mutually and can be selected freely.
•
Additional audio input for alarm priority function.
•
Additional audio input with built-in independent MIC preamplifier.
•
Digital display.
•
Remote control paging or programming.
•
Power off with memory function.
A-2716 Version 1.0
A-2716
Signal Matrix
Page 2 of 6