How To Install; Getting Started - Munchkin STEP Guia Del Usuario

Important Information

GETTING STARTED

Thank you for choosing Munchkin!
Your premium diaper pail features the odor-fighting power of Arm & Hammer™ baking soda, as well as
self-sealing technology that prevents odors from seeping out.
This pail has been designed to accommodate Arm & Hammer™ Snap, Seal & Toss
refill rings from Arm & Hammer™, Nursery Fresh®, Up & Up® and Comforts for Baby
Enjoy keeping your nursery smelling fresh! Simply install the lavender scent baking soda PUCK
well as starter ring or Snap, Seal & Toss TM bag, to get started.
Clean and inspect before use. This is not a toy; for adult use only.
WARNING:
4
INSTALLING THE PUCK
1
bags, as well as
TM
TM .
, as
TM
Mount the Arm & Hammer™
PUCK™ into the bracket on the
underside of the lid.
INSTALLING THE REFILL
1
2
Turn clockwise to lock into
position.
Replace the puck every 60 to 90 days for maximum odor protection.
2
Release
Button

How to Install

3
Turn counter-clockwise to
remove.
OPEN THE FRONT DOOR:
1.
Press the button on the silver
inner lid and swing the front
door open from the left side.
2. THEN LIFT THE SILVER INNER
LID: Press the release button
just beneath the inner lid and
lift it up.
5