User Maintenance Instruction - Farouk GF7057 Manual Del Proprietário

Use + or – buttons to manually adjust heat settings.
For access to preset settings press the mode button. Preset temperatures are
color coded based on hair type.
For Fine hair set to 370
For Medium hair set to 395
For Coarse hair set to 425
This iron features rapid Infrared Ray heating from the Ceramic heater, and
uses the Ceramic coated plates to protect hair condition.
MAINTENANCE
Your appliance is virtually maintenance free. No lubrication is needed.
Keep heated surfaces clean and free of dust, dirt, and hair spray. If cleaning
becomes necessary, disconnect the appliance from the power source and
wipe the exterior with a damp cloth. If the cord becomes twisted, untwist
prior to use.

USER MAINTENANCE INSTRUCTION

Avoid any contact with skin, the surface is too hot!!
When in frequent daily use, set the iron on a damp towel, or in an iron
holder between applications. Do not set the iron on delicate cabinet surface
or near any flammable materials.
The ceramic plates may be cleaned of product build-up using rubbing
alcohol and a clean cloth. Be sure that the CHI
unplugged, and cool to the touch before cleaning. Do not use abrasive
cleansers or materials on the ceramic plates, as this will damage the
heating surface.
As with any electrical appliance, keep the CHI
Never submerge the CHI
warranty, and may cause injury to persons or the risk of fire.
F, Blue light
o
F, Green light
o
F, Red light
o
iron in water as it will damage the Iron, void the
®
iron is turned off,
®
iron away from water.
®
5