Using Chrono And Setting Alarms; Using Chrono; Setting An Alarm - Suunto M3 Manual De Usuario

5. USING CHRONO AND SETTING ALARMS

You can use the Suunto M3 as a chronograph or as a tool to remind you of important
events with alarms.

5.1. USING CHRONO

You can use the chronograph in both the Time and the Timer displays.
1. Press the MODE button so that 0:00,0 is displayed on the bottom row.
2. Press CHRONO to start the chrono.
TIP: You can switch between the Time display and the Timer display without
disturbing a running chrono by long pressing the MODE button.
3. Press CHRONO to stop the chrono.
4. Press CHRONO again to reset the chrono.
TIP: While waiting for the race start, you can use the Suunto M3 chronograph
to estimate the time to reach the start line by taking practice starts.
The race timer helps you to follow the official race start countdown.

5.2. SETTING AN ALARM

You can set up to 3 different alarms to remind you of important events. When an
alarm is set, is displayed in the lower right corner of the display.
1. In the Time display, press ENTER and select Alarm from the menu.
2. Select one of the 3 alarms and press ENTER.
3. Set the alarm to On.
4. Set the time and date for the alarm with the UP/DOWN buttons. Press ENTER to
accept the values.
12