ION Holiday Party Guia De Inicio Rapido página 6

Features
1. Remote Sensor: Aim the remote here to adjust the
options.
2. Thumbscrew: Loosen and tighten this at the angle you
want the light to be projected.
3. Stake: Place this into the ground to secure Holiday Party.
4. Dome: This projects the different colored lights.
5. Power Button: Press and release to power on. Press and
hold for 2 seconds to power off. In the event the remote
control is lost, the Power button allows for cycling through
the light modes 1 – 4 by quickly pressing and releasing the
Power button. However, individual color selection must be
performed with the remote.
Remote Instructions
Use the remote to start/stop the motor, select individual colors, and
power the unit on/off. Point the remote at the front receptacle on the
dome light and press the button of the option you would like to select.
See the diagram for button descriptions.
Note: Before using the remote control for the first time, pull out the tab
attached to the battery compartment. To change the remote battery,
follow the diagram located on the back of the remote. Use a 3V DC
CR2025 lithium button cell battery for replacement.

ALL ON/OFF = Switches the colors on or off.

R = Switches the Red color on or off.

G = Switches the Green color on or off.

B = Switches the Blue color on or off.

W = Switches the White color on or off.

MODE 1-4 = See the Light Modes section for Mode details.

POWER ON/OFF = Puts the unit to sleep (all lights and motor are off).
6