Buttons On Tv; Explanation Of Jacks On Tv - TCL LE32HDE3010 Guia Del Usuario

Buttons on TV

If you cannot locate your remote, you can use the TV panel buttons on your
TV to operate many TV features.
Selects channels stored in the channel list or acts as the up/
CH+/-
down arrow (▲/▼) through the menu items.
Increases/decreases the volume or acts as the right/left
arrow (◄/►) through the menu items.
VOL+/-
VOL+ also acts as the OK button when in the menu system.
MENU Brings up the TV's main menu.
INPUT Selects the signal source.
(POWER button) Turns the TV on or to standby mode.

Explanation of Jacks on TV

This section describes the jacks on the side/back panel of your TV. There are several
ways to connect components.
SPDIF OUT - DIGITAL AUDIO OUT (coaxial): Use a digital coaxial cable to connect
your TV to a compatible audio receiver.
COMPONENT IN (CMPT) Lets you connect a component that has component video
jacks, such as a DVD player or set-top box. ( Green jack for Y, Blue jack for Pb and
Red jack for Pr )
• Y Pb Pr (Component Video): Provides good picture quality because the video is
separated into three signals. Use three video-grade or component video cables
for the connection.
• L/R AUDIO: Provides left and right audio connection when using the CMPT
VIDEO input. Red and white jacks for R AUDIO and L AUDIO connection.(Note:
AV IN and COMPONENT IN share the same L/R AUDIO and Y/Video input
jacks.)
AUDIO/VIDEO IN (AV IN): Lets you connect a component that has composite video
jacks, such as a VCR, DVD player or set-top box. Green jack for VIDEO connection,
red and white jacks for R AUDIO and L AUDIO connection.
VGA (PC IN (VIDEO) ): Connect your computer or other component with a VGA
output to this jack using a 15-pin,D-sub cable.
L/R AUDIO: Provides audio connection when using HDMI 1/DVI IN jack for DVI or
when using PC VIDEO IN. (Note: DVI IN and PC IN share the same L/R AUDIO
input jacks of COMPONENT IN.)
Note: If using a DVI component, remember to connect the audio cable because the
DVI cable carries only the picture signal, not the sound.
ANT/CABLE/SAT IN: Lets you connect a coaxial cable to receive the signal from
your antenna, cable, or cable box, or satellite receiver.
(HEADPHONE): Allow you to connect headphones to listen to the sound coming
from the TV.
Connections and Setup
2012.
04.17
10:52
:30 +
08'00
'
6
MENU
INPUT
蒋霞
数字签名人 蒋霞
光
DN： cn=蒋霞光，
ou=Shenzhen，
光
dc=com
日期： 2012.05.17
17:17:50 +08'00'