Explanation Of Jacks On Tv - TCL LE32HDE5300 Guía De Usuario

Buttons on TV
If you cannot locate your remote, you can use the
CH+/- Selects channels stored in the channel list or acts as the up/
VOL+/- Increases/decreases the volume or acts as the right/left
VOL+ also acts as the OK button when in the menu system.
MENU
INPUT Selects the signal source.
(POWER
POWER button is located on the front panel of the TV set. )

Explanation of Jacks on TV

components.
COMPONENT IN (CMPT)
player or set-top box. ( Green jack for Y, Blue jack for Pb and Red jack for Pr )
Y Pb Pr (Component Video) Provides good picture quality because the video is separated into three
signals. Use three video-grade or component video cables for the connection.
L/R AUDIO
white jacks for R AUDIO and L AUDIO connection. ( For mono audio sources, be sure to use the L AUDIO
input.) (Note: AUDIO/VIDEO IN and COMPONENT IN share the same L/R AUDIO input jacks.)
AUDIO/VIDEO IN (AV)
connection. ( For mono audio sources, be sure to use the L AUDIO INPUT.)
DVI/PC AUDIO IN (used for DVI/PC only)
Note: If using a DVI component, remember to connect the audio cable because the DVI cable carries only
the picture signal, not the sound.
VGA (PC VIDEO IN)
pin,D-sub cable.
SPDIF OUT - DIGITAL AUDIO OUT (coaxial)
receiver.
ANT/CABLE/SAT IN Lets you connect a coaxial cable to receive the signal from your antenna, cable, or
cable box, or satellite receiver.
Yellow jack for VIDEO connection, red and white jacks for R AUDIO and L AUDIO
Connections and Setup
panel buttons on
Note:
6
Red and