Preparing And Using The Cleaning Pads - Amibot Xline AGX50 Manual De Usuario

EN
Operating the appliance

Preparing and using the cleaning pads

The microfibre cleaning pads can be used dry to remove the
maximum amount of dirt or damp with a detergent suitable for the
surfaces the robot is going to clean.
Use the two cleaning cycles to effectively clean your surfaces:
1. Start the robot in the dry clean mode first.
2. Then, change the microfibre cleaning pads for the second
cleaning cycle. Only apply the detergent to the bottom cleaning
pad and keep the top cleaning pad dry.
NOTES:
• To ensure optimum suction power, the top cleaning pad must be dry.
• When using detergent on the bottom cleaning pad, make sure it does not
become blocked at the risk of seeing the appliance slip and fall from its surface.
10
