Pausing The Appliance; Stopping The Appliance - Amibot Xline AGX50 Manual De Usuario

EN
Operating the appliance

Pausing the appliance

Press the Pause button on the remote control or quickly press the
Start/Pause button on the appliance to pause the robot.
NOTE: When the robot is in AUTO mode, it must be paused (Pause button) before
selecting a different cleaning mode.

Stopping the appliance

When the appliance completes its cleaning cycle, it returns to the
bottom of the cleaned surface and beeps.
The robot's cleaning cycle can be interrupted by pressing on the
STOP button on the remote control. The appliance stops where it is.
Removing the robot from the glazed surface
Keep the safety tether in one hand and hold the robot's handle in
the other to safely remove it from the surface. Press the appliance's
Start/Pause button for around 2 seconds so that its motors and
suction ventilation stop.
Switching off the robot
For security measures, the appliance must be switched off and
unplugged when not in use.
16