Allen + Roth HARDTOP GAZEBO Manual De Instrucciones página 14

ASSEMBLY INSTRUCTIONS
17. Attach the big roof panel covers 1 (M1) to the big
top, securing them with screws (AA) and flat
washers (BB).
Hardware Used
M6 x 15 Screw
AA
M6 Flat Washer
BB
18. Connect the big roof panel covers 3 (M3) to big
roof panel covers 5 (M5) by using screws (AA)
and flat washers (BB). Repeat this procedure to
assemble the big roof panel covers 2 (M2) to the
big roof panel covers 4 (M4).
Hardware Used
M6 x 15 Screw
AA
M6 Flat Washer
BB
19. Insert the big roof panel covers (corner) 1 (O1) to
the bottom border of the small top and connect the
big roof panel covers (corner) 2 (O2). The big roof
panel covers (corner) 1 (O1) should be on top of big
roof panel covers (corner) 2 (O2), securing them with
screws (FF) and flat washers (BB) on each corner.
Then attach the big roof panel covers (middle) (P) by
using screws (FF) and flat washers (BB).
Hardware Used
M6 x 30 Screw
FF
M6 Flat Washer
BB
x 8
x 8
x 32
x 32
x 16
x 16
14
17
AA
M1
18
AA
AA
BB
M3
BB
AA
BB
M5
19
FF
BB
FF
O2
BB
Lowes.com/allenandroth
BB
AA
BB
O1
FF
BB
FF
BB
®