Low Voltage Protection (Battery Saving) - Indel Webasto Marine Compact Classic Instrucciones Para La Instalación Y El Uso

User Manual

8.2 Low voltage protection (battery saving)

In order to prevent excessive battery depletion, a protection device shuts off the
compressor in case of insufficient voltage and turns it back on when the voltage in
the system increases after the batteries have been charged. In the case of no-battery
solar applications, insertion of a 220 kΩ resistance is recommended. Standard battery
protection is configured on the control unit with a resistance with value 0.
If the circuit between pin C and pin P is open, see Table 5.
Table 5: Battery protection data that can be configured by means of resistance R2 indicated in
the wiring diagram.
Table 6: Standard battery protection setting omitting resistance R2 indicated in the wiring
diagram.
81