Additional Functions - Albrecht Tectalk Float Manual Del Usuario

Channel Selection
Press the CH UP or CH DOWN to select the desired channel (1-8).
The factory default start up channel is channel 1 and sub-channel 00.
Before selecting a channel for communication, always listen on it to
ensure it is not already being used. Always avoid selecting a busy
channel when the unit keeps on receiving signal from unknown parties.
Volume selection (8 Levels)
1. Press the VOL UP to increase the volume.
2. Press the VOL DOWN to decrease the volume.
The LE icon and the selected volume level (01-08) will appear on the
LC Display.

Additional Functions

Menu Operation
Press MENU button to successively select these functions.
Normal
Operation
CTCSS
Stop Watch
TX Power
Keytone
Roger Beep VOX on/off
VOX
Call Tone
Sensitivity
Scan
Dual Watch
CTCSS
Scan
Press the CH UP or CH DOWN buttons to select the desired
English 25